Datasheets & Tools – Issue 12


CYBLE-224110-00• Max Power ConsumptionL 21.5 mA
• Certified: Yes
• Data Rate: 1 Mbps
• Range: 400 m
EZ-BLE PSoC Modules are the world’s most integrated, fully certified programmable, Bluetooth Smart or Bluetooth Low Energy (BLE) modules designed for ease-of-use and reducing time-to market.
CYBLE-224110-EVAL• Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: CYBLE-224110
The EZ-BLE™ PSoC® Evaluation Board enables you to evaluate and develop applications on the EZ-BLE PSoC Module.
CYBLE-212006-EVAL• Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: CYBLE-212006-01
Application Development for the CYBLE-212006-01 EZ-BLE PRoC XR BT 4.2 Module
CYBLE-202007-EVAL • Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: CYBLE-202007-01
Evaluation Kit - External Antenna with UFL Connection
CYBLE-202013-EVAL • Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: CYBLE-202013-11
CYBLE-202013-EVAL EZ-BLE™ PRoC® Evaluation Board
CY8CKIT-042-BLE • Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: PSoC4
The Bluetooth® Low Energy Pioneer Kit enables customers to evaluate and develop Bluetooth Low Energy projects using the PSoC® 4 BLE and PRoC® BLE devices.
CY8CKIT-042-BLE-A• Type: Bluetooth
• Frequency: 2.4 GHz
• Core Supported: PSoC4
PSoC® 4 BLE and PRoC™ BLE (Programmable Radio-on-Chip) Devices
CY8CKIT-002• Type: Programmer/Debugger/Software
• Core Supported: PSoC
The CY8CKIT-002 PSoC® MiniProg3 all-in-one programmer debug Kit for PSoC 1, PSoC 3 and PSoC 5 architectures with an USB-I2C Bridge for debugging I2C serial connections and communicating with PSoC devices.

NXP Semiconductor
PN5180• Host interface: 1.8 or 3.3 V, 7 Mbit/s SPI, IRQ & busy signals (improved host communication, task scheduling)
• RF driver supply voltage: 2.7 to 5.5 V
• Max. transmitter current: 250 mA
• Low-power card detection, supported by LDO wakeup signa
• 4 Multi-purpose outputs on TFGBA, 1 multi-purpose output on HVQFN
• Packages: HVQFN40 for easy PCB design, TFBGA64 with extra GPIO and added security for PCI compliance
• HW support for EMVCo EMD handling
• Operating temperature: -30 to +85 °C
• Fast SPI host interface with optimized commands for use with 32-bit host controllers
Offering high output power, Dynamic Power Control, multiple power-saving features, this advanced, multi-protocol NFC frontend delivers efficient, robust, and reliable operation, even in harsh conditions.
PN5180A0HN/C1E• Type: Read/Write
• Clock Frequency-Max: 13.56 MHz
• Supply Current: 20 mA
• Supply Voltage: 2.7 to 5.5 V
PN5180 Series 2.7 - 5.5 V 13.56 MHz NFC High-power NFC Frontend - HVQFN40
OM25180FDK,699• Type: RFID/NFC
• Frequency: 13.56 MHz
• Core Supported: PN5180
PN5180 NFC NFC Front End Development Kit

PAN1761• Bluetooth 4.1
• Receiver Sensitivity (30.8% PER)
• Output Power
• Power Supply
• Transmit and Receive Mode
• Low Power Mode
• Operating Temperature Range
Embedded Bluetooth Low Energy and NFC Combination RF Module,
ENW-89848A1KF• Certified: Yes
• Data Rate: 424 kbps
PAN1761, BLE with NFC, Embedded Processor With Antenna
ENW-89848AVKFPAN1761 Experimenter Kit
ENW-89848AYKFPAN1761 Demonstration Kit

SPWF04SA• Module: 802.11 b/g/n
• RF Band: 2.4 GHz
• Certified: Yes
Wi Fi Module with integrated Antenna and protocol stack
SPWF04SC• Module: 802.11 b/g/n
• RF Band: 2.4 GHz
• Certified: Yes
Wi Fi Module with integrated U.FL Connector and protocol stack
X-NUCLEO-IDW04A1• Type: WiFi
• Core Supported: SPWF04SA
Wi-Fi expansion Board based on SPWF04SA
STEVAL-PCC018V1• Type: Adapter BoardsUART to USB Bridge

Leave a Reply

Your email address will not be published. Required fields are marked *

Protected by WP Anti Spam